Start a new topic

Bluecherry BC-08240A - 8 port video, 8 port audio realtime hardware compression card Zoneminder

Using Zoneminder 1.25.X and the Bluecherry BC-08240A - 8 port

video card, is it possible to configure Zoneminder to use display ports

so that I can view my Pelco Specta Analog Cameras. http://community.bluecherrydvr.com/responses/using_the_display_port_on_bluecherry_hardware_compression_cards

I know the modules are loading correctly and that the cameras are working flawlessly.

  1. [ 8.520907] solo6x10 0000:0a:09.0: Display as /dev/video0 with 8 inputs (2 extended) [ 8.524097] ADDRCONF(NETDEV_UP): eth0: link is not ready

    [ 8.529107] solo6x10 0000:0a:09.0: Encoders as /dev/video1-8



  1. guvcview --device=/dev/video6

  2. vlc -vvv --color v4l2:///dev/video6 mplayer tv:// -tv driver=v4l2:width=640:height=480:device=/dev/video6 -fps 15

  1. vlc -vvv --color v4l2:///dev/video6 --run-time 1 vlc://quit -I dummy -V dummy -A dummy [0xb5000960] v4l2 demux debug: trying kernel V4L2

    [0xb5000960] v4l2 demux debug: device Softlogic 6010 using driver solo6x10 (version 2.4.3) on PCI 0000:0a:09.0


    [0xb5000960] v4l2 demux debug: the device has the capabilities: 0x05000001


    [0xb5000960] v4l2 demux debug: (X) Video Capture, ( ) Audio, ( ) Tuner, ( ) Radio


    [0xb5000960] v4l2 demux debug: (X) Read/Write, (X) Streaming, ( ) Asynchronous


    [0xb5000960] v4l2 demux debug: video input 0 (Camera 1) has type: External analog input *


    [0xb5000960] v4l2 demux debug: video input 1 (Camera 2) has type: External analog input


    [0xb5000960] v4l2 demux debug: video input 2 (Camera 3) has type: External analog input


    [0xb5000960] v4l2 demux debug: video input 3 (Camera 4) has type: External analog input


    [0xb5000960] v4l2 demux debug: video input 4 (Camera 5) has type: External analog input


    [0xb5000960] v4l2 demux debug: video input 5 (Camera 6) has type: External analog input


    [0xb5000960] v4l2 demux debug: video input 6 (Camera 7) has type: External analog input


    [0xb5000960] v4l2 demux debug: video input 7 (Camera has type: External analog input


    [0xb5000960] v4l2 demux debug: video input 8 (Multi 4UP-1) has type: External analog input


    [0xb5000960] v4l2 demux debug: video input 9 (Multi 4UP-2) has type: External analog input


    [0xb5000960] v4l2 demux debug: input set to 0


    [0xb5000960] v4l2 demux debug: device supports chroma UYVY [UYUV 4:2:2 Packed, UYVY]


    [0xb5000960] v4l2 demux debug: boolean Motion Detection Trace (08000002)


    [0xb5000960] v4l2 demux debug: current: false, default: false


    [0xb5000960] v4l2 demux debug: found default width and height of 704x480


But

I cant get Zoneminder to diplay the cameras correctly using file

-->/dev/video6. I can get them to work using ffmpeg /dev/video6 but

there are some clarity issues.Help

Login or Signup to post a comment