Start a new topic

Unable to install solo6010-dkms on Debian Squeeze.

I am running into trouble when trying to install Bluecherry on a fresh install of Debian Squeeze. (# uname -a

Linux bluecherry 2.6.32-5-amd64 #1 SMP Fri May 10 08:43:19 UTC 2013 x86_64 GNU/Linux)

Here's what I get when it comes to the point where solo6010-dkms needs to be installed:

# apt-get install solo6010-dkms

Reading package lists... Done

Building dependency tree

Reading state information... Done

The following NEW packages will be installed:

solo6010-dkms

0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.

Need to get 0 B/55.8 kB of archives.

After this operation, 260 kB of additional disk space will be used.

Selecting previously deselected package solo6010-dkms.

(Reading database ... 37628 files and directories currently installed.)

Unpacking solo6010-dkms (from .../solo6010-dkms_2.4.8-1_all.deb) ...

Setting up solo6010-dkms (2.4.8-1) ...

Removing all [solo6010-2.4.8] DKMS Modules

Error! There are no instances of module: solo6010

2.4.8 located in the DKMS tree.

Done.

Adding [solo6010-2.4.8] Module to DKMS build system

Doing initial module build

Error! Bad return status for module build on kernel: 2.6.32-5-amd64 (x86_64)

Consult the make.log in the build directory

/var/lib/dkms/solo6010/2.4.8/build/ for more information.

dpkg: error processing solo6010-dkms (--configure):

subprocess installed post-installation script returned error exit status 10

configured to not write apport reports

Errors were encountered while processing:

solo6010-dkms

E: Sub-process /usr/bin/dpkg returned an error code (1)

Here's what I see in /var/lib/dkms/solo6010/2.4.8/build/make.log:

# cat /var/lib/dkms/solo6010/2.4.8/build/make.log

DKMS make.log for solo6010-2.4.8 for kernel 2.6.32-5-amd64 (x86_64)

Wed Aug 7 17:26:46 MDT 2013

make: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64'

LD /var/lib/dkms/solo6010/2.4.8/build/built-in.o

CC [M] /var/lib/dkms/solo6010/2.4.8/build/solo6x10-core.o

/var/lib/dkms/solo6010/2.4.8/build/solo6x10-core.c: In function ‘solo_sysfs_init’:

/var/lib/dkms/solo6010/2.4.8/build/solo6x10-core.c:484: warning: passing argument 2 of ‘device_create_file’ discards qualifiers from pointer target type

CC [M] /var/lib/dkms/solo6010/2.4.8/build/solo6x10-i2c.o

CC [M] /var/lib/dkms/solo6010/2.4.8/build/solo6x10-p2m.o

CC [M] /var/lib/dkms/solo6010/2.4.8/build/solo6x10-v4l2.o

/var/lib/dkms/solo6010/2.4.8/build/solo6x10-v4l2.c: In function ‘solo_v4l2_open’:

/var/lib/dkms/solo6010/2.4.8/build/solo6x10-v4l2.c:457: warning: passing argument 2 of ‘videobuf_queue_dma_contig_init’ discards qualifiers from pointer target type

CC [M] /var/lib/dkms/solo6010/2.4.8/build/solo6x10-tw28.o

CC [M] /var/lib/dkms/solo6010/2.4.8/build/solo6x10-gpio.o

CC [M] /var/lib/dkms/solo6010/2.4.8/build/solo6x10-disp.o

CC [M] /var/lib/dkms/solo6010/2.4.8/build/solo6x10-enc.o

CC [M] /var/lib/dkms/solo6010/2.4.8/build/solo6x10-v4l2-enc.o

/var/lib/dkms/solo6010/2.4.8/build/solo6x10-v4l2-enc.c: In function ‘solo_enc_open’:

/var/lib/dkms/solo6010/2.4.8/build/solo6x10-v4l2-enc.c:980: warning: passing argument 2 of ‘videobuf_queue_sg_init’ discards qualifiers from pointer target type

CC [M] /var/lib/dkms/solo6010/2.4.8/build/solo6x10-g723.o

CC [M] /var/lib/dkms/solo6010/2.4.8/build/solo6x10-eeprom.o

make[3]: *** No rule to make target `/var/lib/dkms/solo6010/2.4.8/build/videobuf-dma-contig.o', needed by `/var/lib/dkms/solo6010/2.4.8/build/solo6x10-edge.o'. Stop.

make[2]: *** [_module_/var/lib/dkms/solo6010/2.4.8/build] Error 2

make[1]: *** [sub-make] Error 2

make: *** [all] Error 2

make: Leaving directory `/usr/src/linux-headers-2.6.32-5-amd64'

Any advice on what to try?

Login or Signup to post a comment