Start a new topic

2.8: no liveview using web interface

My liveview grid shows empty boxes. I enabled all the cameras by clicking on the "Bluecherry hardware compression 16 Port (solo6010)" button on the "Devices" page, then proceeding to enable and define the details for each camera. Then when I go to the liveview page, there I can define which camera is to be displayed in each box by clicking on the "Click to select a camera". This prompt then goes away for each of the chosen boxes when I leave the page and come back to it. But after this, I see no video in any of the chosen boxes. I confirmed I had video drivers installed with:


# lsmod |grep solo
solo6x10 75356 14
snd_pcm 88662 1 solo6x10
snd 65338 3 solo6x10,snd_timer,snd_pcm
videobuf2_dma_contig 17741 1 solo6x10
videobuf2_dma_sg 12655 1 solo6x10
videobuf2_core 47787 1 solo6x10
v4l2_common 12995 2 solo6x10,videobuf2_core
videodev 126451 17 solo6x10,v4l2_common,videobuf2_core
i2c_core 46012 8 drm,igb,i2c_i801,solo6x10,drm_kms_helper,i2c_algo_bit,v4l2_common,videodev


 


Any ideas?

Login or Signup to post a comment